Cutting Tolerances | Metal Cutting | Throop, PA

Machines & Cutting Tolerances



Cutting Capabilities and Machines


Nivert Metal Supply Inc has the latest in cutting equipment and can supply cut sizes to better-than-standard tolerances upon your request. Below are our standard cutting tolerances and warehouse machines.
cutting torches

Our Warehouse is Equipped With the Following Machines:

One Cincinnati 6SE12 Hydraulic Plate Shear
  • 5/8 inch x 12ft capacity
One Cincinnati 1812G Mechanical Sheet Shear
  • 1/4 inch x 12ft capacity mechanical shear
One MG Titan II Gantry Cutting System
  • 5 Alfa oxy-fuel cutting torches
  • 2 Hypertherm HPR260 plasma units
  • 10ft x 25ft capacity
  • Can gas cut carbon steel from light gauge to 6” thick
  • Can plasma cut carbon steel to 1-1/4” thick and stainless steel to 1" thick
  • Can use customer supplied CAD drawings or we can create CAD drawings from customer supplied documents
One MG Metal Master Plus Cutting System
  • 2 Hypertherm HPR260 plasma units with “TrueHole” technology
  • 8ft x 20ft capacity
  • Can plasma cut carbon steel to 1-1/4” thick and stainless to 1" thick
  • Can use customer supplied CAD drawings or we can create CAD drawings from customer supplied documents
One MG Metal Master Xcel Cutting System
  • 2 Hypertherm HPR400 plasma units with “TrueHole” technology
  • 10ft x 25ft capacity
  • Can plasma cut carbon steel to 2” thick, stainless to 1-3/4" thick and aluminum to 1-1/2" thick
  • Can use customer supplied CAD drawings or we can create CAD drawings from customer supplied documents
Three Marvel 81A Vertical Band Saws
One Marvel 2150PC60 Vertical Band Saw
One Spartan PA13/3EPC Horizontal Band Saw
One Hyd-Mech H22A-120 Horizontal Band Saw
One HE&M WF190LA-DC-CTS Horizontal Band Saw
  • 44" wide x 25" high table
  • Laser light system for precision cutting
  • Full capacity top clamps for bundle cutting
  • Bi-directional outbound powered vice and 10’ automatic advance for production cutting

Standard Tolerances

The variations listed below govern cutting on commodities as specified for shipments from warehouse stock. All orders we accept are subject to these variations in cutting unless otherwise specified. Prices for greater accuracy are quoted upon request.

Shear – through ¼”
  • Length & Width: + 1/16” / - 0
  • Squareness (only on customer request): + / - 1/16”
Shear – over ¼”
  • Length & Width: + 1/8” / - 0
  • Squareness (only on customer request): + / - 1/8”
Burning:
  • Outside of shape:
  • To under ½”: + 1/8” / - 0
  • ½” to under 1”: + 3/16” / - 0
  • 1” to under 3”: + 1/4” / - 0
  • 3” and over: + 5/16” / - 0
Hole ID:
  • To under ½”: + 0 / - 1/8"
  • ½” to under 1”: + 0 / - 3/16"
  • 1” to under 3”: + 0 / - 1/4"
  • 3” and over: + 0 / - 5/16"
Note – The diameter of holes cannot be smaller than the thickness of the material.

Saw Cut Steel Plate:
  • To under 2”: + 3/16” / - 0
  • 2” and over”: + 1/4” / - 0
Saw Cut Bars & Structurals:
  • Length: + / - 1/16”
  • Mitre: + / - 1/2 degree
Note – due to the way they are formed, mitre cut tolerances cannot be promised for square & rectangular tubes over 6 wide. Please discuss with your salesperson when ordering.

Bar Grating:
Due to the variation of bar grating tolerances we cannot state a standard tolerance. Please discuss with your salesperson at the time of order.
Call us today to place your order for cutting machines!
570-344-7141
mechanical shear
Share by: