Plate
Nivert Metal Supply Inc has a variety of plates in stock that can be ordered and delivered to your location, if you are within our service area. Contact us today.
Hot Rolled Carbon Steel Plates
Regular quality .33 max. carbon
ASTM A36/AASME SA36
Sheared-flame cut
Carbon steel plates are used in structural application and produced from ignots made by the open hearth, the basic oxygen, or the electric furnace processes. It is readily formed and welded, using conventional methods.
Chemical Requirements
| Carbon | Mn. | P. | S. | Si. | |
|---|---|---|---|---|---|
| Max % | % | Max. % | Max. % | % | |
| Regular Quality .33 Max Carbon | .33 | Not Req. | Not Req. | Not Req. | Not Req. |
| ASTM A36/ASME SA36 | |||||
| 3/16" to 3/4" incl. | .25 | Not Req. | .04 | .05 | Not Req. |
| "Over 3/4"" to11/2"" | |||||
| incl." | .25 | .80/1.20 | .04 | .05 | Not Req. |
| "Over11 /2"" to 21/2"" | |||||
| incl." | .26 | .80/1.20 | .04 | .05 | 15/ 40 |
| Over 21 /2" to 4" incl. | .27 | .85/1.20 | .04 | .05 | .15/.40 |
| Over 4" incl. | .29 | .85/1.20 | .04 | .05 | .15/.40 |
Physical Properties
| Tensile Strength P.S.I. | Yield Strength P.S.I. | Elong. In. 8'' % | Elong. In. 2'' % | |
|---|---|---|---|---|
| Regular Quality .33 max Carbon | Not Required | Not Required | Not Required | Not Required |
| ASTM A36 / ASME SA36 | 58 / 80,000 | 36,000 Min. | 20 | 23 |
Hot Rolled Steel Plates
In addition to plate thicknesses listed, Nivert Metal Supply Inc also stocks 2 1/4”, 2 1/2”, 3”, 3 1/4”, 3 1/2”, 4”, 4 1/2”, 5”, and 6” plates.
| Thickness | Weight per Sq. Ft. | Stock Size | Weight Per Plate |
|---|---|---|---|
| In. | (Lbs.) | In. | Lbs. |
| 3/16 | 7.65 | 48 x 96 | 245 |
| 48 x 120 | 306 | ||
| 48x 144 | 368 | ||
| 60 x 96 | 306 | ||
| 60 x 120 | 383 | ||
| 60 x 144 | 459 | ||
| 72 x 141 | 551 | ||
| 72 x 240 | 918 | ||
| 96 x 240 | 1,224 | ||
| 1/4 | 10.2 | 48 x 96 | 327 |
| 48 x 120 | 408 | ||
| 48 x 144 | 490 | ||
| 60 x 120 | 510 | ||
| 60 x 144 | 612 | ||
| 60 x 240 | 1,020 | ||
| 72 x 240 | 1,224 | ||
| 84 x 240 | 1,428 | ||
| 96 x 240 | 1,632 | ||
| 5/16 | 12.75 | 48 x 96 | 408 |
| 48 x 120 | 510 | ||
| 48 x 144 | 612 | ||
| 60 x 120 | 638 | ||
| 60 x 144 | 765 | ||
| 72 x 240 | 1,530 | ||
| 96 x 240 | 2,040 | ||
| 3/8 | 15.3 | 48 x 96 | 490 |
| 48 x 120 | 612 | ||
| 60 x 120 | 765 | ||
| 60 x 1441 | 918 | ||
| 72 x 240 | 1,836 | ||
| 84 x 240 | 2,142 | ||
| 96 x 240 | 2,448 | ||
| 7/16 | 17.85 | 48 x 96 | 572 |
| 96 x 144 | 1,714 | ||
| 1/2 | 20.4 | 48 x 96 | 653 |
| 48 x 120 | 816 | ||
| 60 x 120 | 1,020 | ||
| 72 x 240 | 2,448 | ||
| 84 x 144 | 1,959 | ||
| 96 x 240 | 3,264 | ||
| 9/16 | 22.95 | 96 x144 | 2,204 |
| 5/8 | 25.5 | 48 x 96 | 816 |
| 48 x 120 | 1,020 | ||
| 60 x 120 | 1,275 | ||
| 72 x 240 | 3,060 | ||
| 84 x 240 | 3,570 | ||
| 96 x 240 | 4,080 | ||
| 3/4 | 30.6 | 48 x 96 | 980 |
| 48 x 120 | 1,224 | ||
| 60 x 120 | 1,530 | ||
| 72 x 240 | 3,672 | ||
| 84 x 240 | 4,284 | ||
| 96 x 144 | 2,938 | ||
| 96 x 240 | 4,896 | ||
| 7/8 | 35.7 | 48 x 96 | 1,143 |
| 96 x 240 | 5,712 | ||
| 1 | 40.8 | 48 x 96 | 1,306 |
| 48 x 120 | 1,632 | ||
| 72 x 240 | 4,896 | ||
| 96 x 144 | 3,917 | ||
| 96 x 240 | 6,528 | ||
| 1-1/8 | 45.90 | 96 x 240 | 7,344 |
| 1-1/4 | 51.0 | 96 x 240 | 8,160 |
| 1-3/8 | 56.1 | 96 x 240 | 8,976 |
| 1-1/2 | 61.2 | 96 x 240 | 9,792 |
| 1-5/8 | 66.3 | 96 x 240 | 10,608 |
| 1-3/4 | 71.4 | 96 x 240 | 11,424 |
| 2 | 81.6 | 96 x 240 | 13,056 |
| 2-1/4 | 91.8 | 96 x 240 | 14,688 |
| 2-1/2 | 102.0 | 96 x 240 | 16,320 |
| 2-3/4 | 112.2 | 96 x 240 | 17,952 |
| 3 | 122.4 | 96 x 240 | 19,584 |
| 3-1/4 | 132.6 | 96 x 240 | 21,216 |
| 3-1/2 | 142.8 | 96 x 240 | 22,848 |
| 4 | 163.2 | 96 x 240 | 26,112 |
| 4-1/2 | 183.6 | 96 x 240 | 29,376 |
| 5 | 204.0 | 96 x 240 | 32,640 |
| 6 | 244.8 | 96 x 240 | 39,168 |
Pressure Vessel Quality
| MECHANICAL PROPERTIES | Tensile Strength K.S.I. | Yield Point Min. K.S.I. | Elong. In. 8" % | Elong. In. 2" % |
|---|---|---|---|---|
| ASTM A285 Grade C | 55/75 | 30 | 23 | 27 |
| ASTM A516 Grade 70 | 70/90 | 38 | 17 | 21 |
| ASTM A285 GRADE C ASTM A516 | ASTM A516 Grade 70 | ||
|---|---|---|---|
| Thickness In. | Weight Sq. Ft. | Width In. | "In Lengths Up To In. |
| 3/16 | 7.66 | 96 | 288 |
| 1/4 | 10.21 | 96 | 288 |
| 5/16 | 12.76 | 96 | 288 |
| 3/8 | 15.32 | 96 | 288 |
| 1/2 | 20.42 | 96 | 288 |
| 3/4 | 30.63 | 96 | 288 |
| 1 | 40.84 | 96 | 288 |
| 1 1/8 | 45.90 | 96 | 288 |
| 1 1/4 | 51.05 | 96 | 288 |
| 1 1/2 | 61.26 | 96 | 288 |
High Strength Low Alloy
Steel Plate
ASTMA242-A58 8-A572
Sheard-flame cut
High strength, low alloy (HSLA) steels are basically low carbon steels to which have been added small amounts of such alloying elements, such as chromium, nickel, molybdenum, vanadium, zirconium, copper, and columbium. The effect of these alloy additions is to raise the strength to weight ratio of the steel in the “as rolled” condition, and at the same time, maintain weldability and formability. In A242 and A588, where copper is added, these steels also have 5 to 8 times more resistance to atmospheric corrosion than regular carbon steel, and generally increased resistance to impact and abrasion. Also, painted surfaces have a far greater life than the painted surfaces of mild steel.
| Thickness In. | Weight per Sq. Ft. (Lbs.) | Stock Width (In.) |
|---|---|---|
| 1/4 | 10.20 | 48" |
| 1/4 | 12.75 | 72" |
| 1/4 | 10.20 | 96" |
| 5/16 | 12.75 | 96" |
| 3/8 | 15.30 | 96" |
| 1/2 | 20.40 | 96" |
| 5/8 | 25.50 | 96" |
| 3/4 | 30.60 | 96" |
| 7/8 | 35.70 | 96" |
| 1 | 40.80 | 96" |
| 1 1/4 | 51.00 | 96" |
| 1 1/2 | 61.20 | 96" |
| 1 3/4 | 71.40 | 96" |
| 3 | 81.60 | 96" |
| 2 1/4 | 91.80 | 96" |
| 2 1/2 | 102.00 | 96" |
| 2 3/4 | 112.20 | 96" |
| 3 | 122.40 | 96" |
| 3 1/2 | 142.80 | 96" |
Corten
Steel plate
ASM A588 steel plate
| Thickness In. | Weight per Sq. Ft. (Lbs.) | Stock Width (In.) |
|---|---|---|
| 3/16" | 7.65 | 96" |
| 1/4" | 10.20 | 96" |
| 5/16" | 12.75 | 96" |
| 3/8" | 15.30 | 96" |
| 1/2" | 20.40 | 96" |
| 9/16" | 22.95 | 96" |
| 5/8" | 25.50 | 96" |
| 3/4" | 30.60 | 96" |
| 7/8" | 35.70 | 96" |
| 1" | 40.80 | 96" |
Abrasion Resisting Steel Plate
AR235 (brinell hardness: 200/250)
Nivert Metal Supply Inc’s abrasion resisting plates are used in making scraper blades, grain and feed mill liners and spouts, concrete mixers, conveyors, hammer mill parts, drag lines equipment, coal and gravel screens and chutes, sand, gravel, cement and clay handling machinery. Abrasion resisting plates will, in most cases, outlast ordinary steel by a big margin and compare favorably with high-priced alloy castings. They can be machined, drilled, and punched and will also withstand a certain amount of bending and forming. Welding is not recommended.
| C | Mn | P | S | Si |
|---|---|---|---|---|
| .35/.50 | 1.2/2.0 | .050 max. | .055 max. | .10/.35 |
| Thickness In. | Weight Sq.Ft. | Size In. | ||
| 3/16 | 7.65 | 96 x 240 | ||
| 1/4 | 10.2 | 60 x 120 | ||
| 3/8 | 15.3 | 96 x 240 | ||
| 1/2 | 20.4 | 96 x 240 | ||
| 3/4 | 30.6 | 96 x 240 | ||
| 1 | 40.8 | 96 x 240 |
AR 400-F (Brinell Hardness: 360/444)
AR 400-F has a higher hardness range than AR235, but with better formability and weldability. With both grades, special shop practices most be used.
AR 400-F has a higher hardness range than AR235, but with better formability and weldability. With both grades, special shop practices most be used.
| Chemical Composition | ||||||||
| C .12/.16 | Mn (max) 1.55 | P (max) .025 | S (max) .005 | Si (max) .36/.55 | Ni (max) 1.00 | Mo (max) .55 | Cr (max) .55 | B .00005/.005 |
| Thickness In. | Weight Sq. Ft. | Size In. | ||||||
| 1/4 | 10.2 | 96 x 288 | ||||||
| 3/8 | 15.3 | 96 x 288 | ||||||
| 1/2 | 20.4 | 96 x 288 | ||||||
| 3/4 | 30.6 | 96 x 288 | ||||||
| 1 | 40.8 | 96 x 288 |
Steel Tread Plate
| Thickness In. | Weight per Sq. Ft. (Lbs.) |
|---|---|
| No. 14 x 48 | 3.75 |
| 1/8 x 48 | 6.15 |
| 60 | 6.15 |
| 72 | 6.15 |
| 3/16 x 48 | 8.70 |
| 60 | 8.70 |
| 72 | 8.70 |
| 96 | 8.70 |
| 1/4 x 48 | 11.25 |
| 60 | 11.25 |
| 72 | 11.25 |
| 96 | 11.25 |
| 3/8 x 48 | 16.35 |
| 60 | 16.35 |
| 72 | 16.35 |
| 84 | 16.35 |
| 96 | 16.35 |
| 1/2 x 48 | 21.45 |
| 60 | 21.45 |
| 72 | 21.45 |
| 96 | 21.45 |
Call us today to place your order for steel plates!
570-344-7141
